{"title":"8R Q5\/SQ5 Engine","description":"","products":[{"product_id":"cts-turbo-audi-3-0t-192mm-crank-pulley-upgrade-kit","title":"CTS Audi EA837 3.0T 192mm Crank Pulley Upgrade Kit","description":"\u003cp\u003eThe CTS pulley upgrade is a larger diameter than stock and is made from precision billet T66061 aluminum. It replaces the two-piece design of the failure-prone stock pulley and also reduces the rotational mass of the crank, freeing up horsepower.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe larger diameter pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on the supercharger or engine components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNOTE: This kit must be used with appropriate Stage 2+ performance software. An upgraded heat exchanger is required!\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eStage 2+ performance software will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed-off. This is the same pulley we use in our 605bhp E40 packages.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMost Stage 2+ software tunes are compatible with this kit. Be sure to use the correct software for 192mm pulley selected.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in-house at CTS Turbo, in Canada\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined from billet T66061 aluminum.\u003c\/li\u003e\n\u003cli\u003eOEM-spec honing and tolerances\u003c\/li\u003e\n\u003cli\u003eReplacement crank pulley belt\u003c\/li\u003e\n\u003cli\u003eAnodized black for a long-lasting OEM-looking finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCTS Turbo Crank Pulley (192mm)\u003c\/li\u003e\n\u003cli\u003e8 x Grade 12.9 bolts\u003c\/li\u003e\n\u003cli\u003e1 x Bando belt (Made in the USA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplications: Audi EA837 3.0T\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS4 B8\/B8.5 (2010-2016)\u003c\/li\u003e\n\u003cli\u003eS5 B8\/B8.5 (2010-2016)\u003c\/li\u003e\n\u003cli\u003eSQ5 B8 (2014+)\u003c\/li\u003e\n\u003cli\u003eQ5 B8 (2009+)\u003c\/li\u003e\n\u003cli\u003eA6 C6 (2005.5 – 2011)\u003c\/li\u003e\n\u003cli\u003eA6 C7 (2012+)\u003c\/li\u003e\n\u003cli\u003eA7 C7 (2012+)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":42691972104391,"sku":"CTS-HW-266-192","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/products\/CTS-HW-266-180-1-1.jpg?v=1662872258"},{"product_id":"apr-ignition-coil-pq35-style","title":"APR Ignition Coil, PQ35 Style","description":"\u003cp\u003eAPR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. The commonplace replacement of factory ignition coils with those taken from the higher output Audi R8 is popularly believed to provide greater energy output. However, testing proves that they are no more powerful than the factory coils that are found on other engines. APR Ignition Coils increase energy output by up to 10% over stock. They are a direct upgrade or replacement, and come with a unique red housing!\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 10% more energy output than stock\u003c\/li\u003e\n\u003cli\u003eRed housing with APR Logo\u003c\/li\u003e\n\u003cli\u003eTrue upgrade, not just aesthetic\u003c\/li\u003e\n\u003cli\u003eDirect plug-and-play\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePLEASE NOTE - If your factory ignition coils look physically different, other than color, these upgrades are not compatible. Please make sure your coil style matches before ordering!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 VW\/Audi\/Lamborghini models with PQ35 coils\u003c\/li\u003e\n\u003cli\u003e8L Audi A3\/S3\/TT 1.8T\u003c\/li\u003e\n\u003cli\u003e8P Audi A3\/S3\/RS3 2.0T\/2.5T\u003c\/li\u003e\n\u003cli\u003eB6 Audi A4 1.8T\/3.0 \u003cspan data-mce-fragment=\"1\"\u003e(coils may be too tall for 4.2 S4)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eB7 Audi A4 2.0T\/3.2 (coils may be too tall for 4.2 S4)\u003c\/li\u003e\n\u003cli\u003eB8\/B8.5 Audi A4\/A5 2.0T\/3.2\/3.0T\u003c\/li\u003e\n\u003cli\u003eB8\/B8.5 Audi S4\/S5 3.0T\/4.2 FSI\u003c\/li\u003e\n\u003cli\u003e8R Q5\/SQ5 2.0T\/3.2\/3.0T\u003c\/li\u003e\n\u003cli\u003eC6 Audi A6\/S6 3.2\/3.0T\/5.2 FSI\u003c\/li\u003e\n\u003cli\u003eC7 Audi A6\/A7 3.0T\u003c\/li\u003e\n\u003cli\u003eD3 Audi A8 4.2 FSI\u003c\/li\u003e\n\u003cli\u003eD4 Audi A8 3.0T\u003c\/li\u003e\n\u003cli\u003eMK4 VW Golf\/Jetta\/GTI 1.8T\u003c\/li\u003e\n\u003cli\u003eMK5 VW Golf\/Jetta\/GTI\/Rabbit 2.0T\/2.5\u003c\/li\u003e\n\u003cli\u003eMK6 VW Golf\/Jetta\/GTI\/R 2.0T\/2.5\u003c\/li\u003e\n\u003cli\u003eAll VW models with 2.0TFSI\/2.0TSI EA113\/EA888.1\/EA888.2\u003c\/li\u003e\n\u003cli\u003eMK1\/42 Audi R8 4.2\/5.2 FSI\u003c\/li\u003e\n\u003cli\u003eMK2\/4S Audi R8 5.2 FSI\u003c\/li\u003e\n\u003cli\u003eLamborghini Gallardo LP 5.2 FSI\u003c\/li\u003e\n\u003cli\u003eLamborghini Huracan 5.2 FSI\u003c\/li\u003e\n\u003cli\u003ePorsche models with PQ35 coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnown OEM PQ35 part numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e06D905115\u003c\/li\u003e\n\u003cli\u003e06D905115A\u003c\/li\u003e\n\u003cli\u003e06D905115C\u003c\/li\u003e\n\u003cli\u003e06D905115D\u003c\/li\u003e\n\u003cli\u003e06D905115F\u003c\/li\u003e\n\u003cli\u003e06D905115G\u003c\/li\u003e\n\u003cli\u003e06D905115K\u003c\/li\u003e\n\u003cli\u003e06E905115A\u003c\/li\u003e\n\u003cli\u003e06E905115B\u003c\/li\u003e\n\u003cli\u003e06E905115C\u003c\/li\u003e\n\u003cli\u003e06E905115D\u003c\/li\u003e\n\u003cli\u003e06E905115E\u003c\/li\u003e\n\u003cli\u003e06E905115F\u003c\/li\u003e\n\u003cli\u003e06E905115G\u003c\/li\u003e\n\u003cli\u003e06F905115C\u003c\/li\u003e\n\u003cli\u003e06F905115E\u003c\/li\u003e\n\u003cli\u003e06F905115F\u003c\/li\u003e\n\u003cli\u003e06H905115B\u003c\/li\u003e\n\u003cli\u003e07K905715D\u003c\/li\u003e\n\u003cli\u003e07K905715E\u003c\/li\u003e\n\u003cli\u003e07K905715F\u003c\/li\u003e\n\u003cli\u003e07K905715G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR","offers":[{"title":"Red","offer_id":43247076573383,"sku":"APR-MS100208","price":52.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43247076606151,"sku":"APR-MS100209","price":52.95,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":43247076638919,"sku":"APR-MS100210","price":52.95,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":43247076671687,"sku":"APR-MS100211","price":52.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/ms100208_001.jpg?v=1686675125"},{"product_id":"precision-raceworks-mpi-kit-ea837-audi-3-0t-supercharged","title":"Precision Raceworks MPI Kit, EA837 Audi 3.0T Supercharged","description":"\u003cp\u003eThe Precision Raceworks Multiport Injection (MPI) kit with flex fuel compatibility is a necessity to safely and sufficiently support the power levels of anyone needing additional fueling. This kit is capable of providing supplemental fueling to all 2009-2016 3.0 TFSI Audis.\u003cbr\u003e\u003cbr\u003eThe complete kit integrates seamlessly into your car as if it left the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors which are flow-matched both static and dynamic to within 2%. A Detailed certificate of conformance is included with each kit giving you all flow data needed for optimal tuning.\u003cbr\u003e\u003cbr\u003eAdditionally, this kit opens the runners increasing air volume in the ports and deletes the flaps which allows more linear air flow. This kit features 750cc* injectors standard (this flow rate is based on industry injector flow test pressure of 43.5psi) at 72psi these injectors flow 1000cc. What this means is fueling will never be an issue for the platform again!\u003cbr\u003e\u003cbr\u003eSimply pick up this kit and pair it with your favorite injector controller and you are ready to go! We recommend the Motiv Reflex, which is compatible with all 3.0TFSI vehicles and is loaded with features.\u003c\/p\u003e\n\u003cp\u003eKits will come in \u003cstrong\u003eanodized black\u003c\/strong\u003e, red is for display purposes only.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment: All EA837-equipped Audi 3.0T engines (not including EA837 EVO)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2009-2016 B8\/B8.5 S4\/S5 3.0T (non-CRE)\u003c\/li\u003e\n\u003cli\u003e2013-2016 8R Q5\/SQ5 3.0T (non-CRE)\u003c\/li\u003e\n\u003cli\u003e2009-2011 C6.5 A6 3.0T\u003c\/li\u003e\n\u003cli\u003e2012-2015 C7 A6\/A7 3.0T (non-CRE)\u003c\/li\u003e\n\u003cli\u003e2009-2015 4L Q7 3.0T\u003c\/li\u003e\n\u003cli\u003e2013-2015 D4 A8 3.0T (non-CRE)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Precision Raceworks","offers":[{"title":"Default Title","offer_id":43732022689991,"sku":"601-0243","price":1899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/B8BlackMPI1.webp?v=1711453652"},{"product_id":"audi-ea837-3-0t-sai-delete-plate-set","title":"Audi EA837 3.0T SAI Plate Set","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor offroad use only! Please respect your local emissions laws.\u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003eSecondary air issues plaguing your supercharged Audi 3.0T? This set of billet SAI plates allows you to completely remove your SAI system including all hoses, valves, and pump (with proper tuning), greatly increasing serviceability and reliability. These plates are specifically engineered to fit the EA837 3.0T, and are \u003cstrong\u003enot\u003c\/strong\u003e generic SAI plates that you will have to grind down to fit your engine.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: We recommend leaving the SAI solenoids installed \u0026amp; connected to limit faults. Install the provided caps onto each solenoid during installation. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eProper tuning is required to prevent CEL.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproves access to the PCV area and rear timing covers, turning an 11-hour timing cover reseal into a 2-hour job\u003c\/li\u003e\n\u003cli\u003ePrevents the common SAI flow faults that occur regularly on the 3.0T engine\u003c\/li\u003e\n\u003cli\u003eEliminates breakage of the brittle SAI pipes during carbon cleaning or PCV, thermostat and water pump replacement\u003c\/li\u003e\n\u003cli\u003eProvides easy access to all rear components including oxygen sensor connectors, oil filter housing and more\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet SAI plates with o-rings x2\u003c\/li\u003e\n\u003cli\u003eStainless cap screws x4\u003c\/li\u003e\n\u003cli\u003eVacuum caps for top port of SAI solenoids x2 (B8.5 will only use 1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment: \u003c\/strong\u003e\u003cstrong\u003eAll EA837 3.0T engines\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eB8 S4\/S5 3.0T\u003c\/li\u003e\n\u003cli\u003eB8.5 S4\/S5 3.0T\u003c\/li\u003e\n\u003cli\u003eC6 A6 3.0T\u003c\/li\u003e\n\u003cli\u003eC7 A6\/A7 3.0T\u003c\/li\u003e\n\u003cli\u003eD4 A8 3.0T\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDoes not fit EA837Evo (CRE) engines without modification. New version coming soon!\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTorque: 9nm with blue loctite\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease refer to the diagrams below for installation. Note that if you still have stock cats installed, transmission removal may be required for installation. The stock cats block access to the SAI valve\/heat shield bolts and will need to be removed to install this kit.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/SAI_Valves_EA837-1_Plate_Locations.png?v=1710263670\" width=\"556\" height=\"401\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/SAI_Valves_EA837-1_Removed.png?v=1710263670\" width=\"557\" height=\"402\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/SAI_Valves_EA837-2.png?v=1710263670\" width=\"555\" height=\"335\"\u003e\u003c\/p\u003e","brand":"Garage Auto Sports","offers":[{"title":"Pre-CREC","offer_id":46499341500615,"sku":"GAS-SAI-EA837-V1","price":69.95,"currency_code":"USD","in_stock":true},{"title":"CREC","offer_id":46499341467847,"sku":"GAS-SAI-EA837-V2","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/DSC07349.jpg?v=1777999342"},{"product_id":"gas-griptech-crec-supercharger-pulley-57-6mm","title":"GAS Griptec CREC Supercharger Pulley, 57.6mm","description":"\u003cp\u003eThis pulley upgrade is the result of a development project between GAS and ZPE to find a solution to belt slip for your CREC-powered Audi 3.0T! The ideal upper pulley size paired with ZPE’s most aggressive race coating, this is the final solution for belt slip.\u003c\/p\u003e\n\u003cp\u003eThe patented Griptec Coating by ZPE ensures that even when pushed to aggressive pulley ratios with our you can still avoid belt slip.\u003c\/p\u003e\n\u003cp\u003eYour current belt can be re-used (will differ based on lower pulley size). If you need a new belt, we offer them \u003ca href=\"https:\/\/garageautosports.com\/products\/supercharger-belt-audi-3-0t-various-sizes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eHate clutch slip? Don't forget to pair this Griptec pulley with our \u003ca href=\"https:\/\/garageautosports.com\/collections\/c7-a6-s6\/products\/gas-billet-supercharger-clutch-delete-audi-crec-3-0t\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBillet Clutch Delete\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eMachined and coated in the USA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGriptec-coated supercharger pulley\u003c\/li\u003e\n\u003cli\u003e4x ARP bolts (10mm 12-point socket required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Audi 3.0T Supercharged engines with 4-bolt supercharger pulleys\u003c\/li\u003e\n\u003cli\u003eThis will \u003cspan style=\"text-decoration: underline;\"\u003enot\u003c\/span\u003e work as a replacement for press-on style pulleys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Spec is 32nm (24ft-lbs) for the ARP bolts\u003c\/strong\u003e\u003c\/p\u003e","brand":"Garage Auto Sports","offers":[{"title":"Default Title","offer_id":44118883696839,"sku":"GAS.AR576M3AZ7","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/FullSizeRender_1d97cc0e-f5da-4270-9dc4-0aa4fd093083.jpg?v=1755742853"},{"product_id":"ie-3-0t-hpfp-internal-upgrade-kit-for-audi-3-0t-supercharged-s4-s5-a6-a7-sq5-q5","title":"IE 3.0T HPFP Internal Upgrade Kit For Audi 3.0T Supercharged S4\/S5\/A6\/A7\/SQ5\/Q5","description":"\u003cp\u003e\u003cspan\u003eIE's HPFP internals upgrade kit for the Audi 3.0TFSI Supercharged engines is perfect for the DIY user looking to upgrade their factory-equipped HPFP pump body with new higher flowing internals. These USA-engineered and manufactured parts will reliably transform your stock pump housing into a high-flow fuel pump for use on dual pulley ECU tunes to provide enough flow for ethanol fuel blends. The 11.67mm piston is the largest sized diameter possible within the fuel-pump body.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHPFP internal DIY kit -upgrade your stock pump internals\u003c\/li\u003e\n\u003cli\u003eHPFP upgrade for ethanol tunes\u003c\/li\u003e\n\u003cli\u003eReliably adds a larger fuel ceiling for increased flow\u003c\/li\u003e\n\u003cli\u003eThe piston diameter increased to 11.67mm\u003c\/li\u003e\n\u003cli\u003eLargest stroke volume available\u003c\/li\u003e\n\u003cli\u003eBroken-in and bench tested on in-house pump dyno\u003c\/li\u003e\n\u003cli\u003eConstant diameter piston design for long-life operation\u003c\/li\u003e\n\u003cli\u003eRetains OE spring to avoid increased camshaft wear\u003c\/li\u003e\n\u003cli\u003eTool steel DLC-coated pin\u003c\/li\u003e\n\u003cli\u003eNitrided tool steel cylinder\u003c\/li\u003e\n\u003cli\u003eMolybdenum disulphide impregnated leak-free seal\u003c\/li\u003e\n\u003cli\u003eStainless steel seal body\u003c\/li\u003e\n\u003cli\u003eBuna-N rubber oil-resistant o ring\u003c\/li\u003e\n\u003cli\u003eIndividually tested and verified for extreme tolerances\u003c\/li\u003e\n\u003cli\u003eEngineered, designed, \u0026amp; manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":44488418623687,"sku":"IEFUVO1","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/IMG-9874.png?v=1722882624"},{"product_id":"griptec-press-on-hub-pulley-kit-audi-ea837-3-0t","title":"Griptec Hub \u0026 Pulley Kit, Audi EA837 3.0T","description":"\u003cp\u003e\u003cspan\u003eThis pulley and hub combo for your pre-CRE Audi 3.0T is the final solution for belt slip! Coated with ZPE's patented Griptec coating, slipping supercharger belts and lost boost are a thing of the past. Made from 7075-T6 aluminum (the same material our CREC clutch deletes are made of), this combo is made to last.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWe've paired this combo together to take the guesswork out of putting together a Griptec setup for your B8\/C7\/8R\/C6. We recommend pairing this upper pulley with a \u003ca href=\"https:\/\/garageautosports.com\/products\/cts-turbo-audi-3-0t-192mm-crank-pulley-upgrade-kit?_pos=1\u0026amp;_psq=192mm\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003e192mm Crank Pulley\u003c\/a\u003e, but it also works well with any existing crank pulley you may have. Pair with your stock crank pulley for a reliable Stage 2 setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation by a qualified shop is strongly recommended! This hub must be heated and slipped on like a traditional upper pulley, and may come loose if installed incorrectly or pressed without heating.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"ship-label\"\u003eBuilt to Order: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"ship-info\"\u003eOnce Ordered, Estimated Time to ship will be 5 to 7 Business Days.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGriptec 57mm supercharger pulley\u003c\/li\u003e\n\u003cli\u003eMK AU 304SS Hub fits 10 M5 screws\u003c\/li\u003e\n\u003cli\u003eT30 Custom CNC Titanium M5 screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZPE","offers":[{"title":"63mm (stock)","offer_id":46132806484167,"sku":"AU1864SR0K.AU63MBV2Z7","price":289.95,"currency_code":"USD","in_stock":true},{"title":"57mm","offer_id":46132806516935,"sku":"AU1864SR0K.AU57MBV3Z7","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/Griptec57mmMKAU2.jpg?v=1740696289"},{"product_id":"direct-injector-cleaning-service","title":"Direct Injector Cleaning Service","description":"\u003cp\u003eIf you're having injector issues including black smoke, poor fuel mileage or misfires, it's likely that your injectors need some love. We are proud to offer fuel injector cleaning services for both direct and port injectors in-house at our Ontario, Canada location!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProcess:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlace your order for a quantity that matches the number of injectors you will be sending (6 = 6 injectors, 4 = 4 injectors, etc). If you opted for new seals, please include your VIN in the order notes to prevent delays. Once your order is placed, box up your injectors and send them to us \u003ca href=\"https:\/\/garageautosports.com\/pages\/contact-us\" target=\"_blank\" rel=\"noopener\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAs soon as we receive your injectors we will run an initial test, measuring the effective flow rate and evaluating the spray pattern and removing the old seals.\u003c\/p\u003e\n\u003cp\u003eYour injectors will then receive our full spa treatment, with an internal and external ultrasonic cleaning under our specific variety of operating conditions, a full back purge, and finally a second flow test and spray pattern evaluation.\u003c\/p\u003e\n\u003cp\u003eOnce clean, the injectors will be packaged up and send back to you along with a copy of your test results \u0026amp; evaluations. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are responsible for shipping your injectors to us. The shipping cost you pay at checkout will cover return shipping to you\u003c\/li\u003e\n\u003cli\u003eWe will treat your injectors as if they were our own, but we are not responsible for any damage that occurs during shipping. Package your injectors carefully!\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis service covers injector cleaning, not repair. If you have a dead injector that does not function, we will contact you before proceeding\u003c\/li\u003e\n\u003cli\u003eWe will also clean port\/MPI injectors for the same cost\u003c\/li\u003e\n\u003cli\u003eNew injector seal kits can be provided if desired. Include your VIN and we will update your order with the new seals\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003ePrice is per injector, order the number of injectors you have\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garage Auto Sports","offers":[{"title":"Yes; I would like a quote on new seals (VIN required)","offer_id":44930175795399,"sku":"INJ-CLEAN-SEAL","price":39.95,"currency_code":"USD","in_stock":true},{"title":"No; I will source my own seals","offer_id":44930175828167,"sku":"INJ-CLEAN","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/RS4fuelinjector.jpg?v=1740758810"},{"product_id":"jackal-motorsports-parallel-fuel-line-kit-audi-crec","title":"Jackal Motorsports Parallel Fuel Line Kit, Audi CREC","description":"\u003cp\u003eEnhance your Audi’s performance with the Jackal Motorsports MPI Fuel Delivery Upgrade, designed specifically for CREC-based platforms like the Audi C7 A6, B8 S5, and 4M Q7. This upgrade from Jackal Motorsports is the first to address the fuel limitations often encountered with high-performance tuning, particularly on Stage 2+ setups, high-ethanol blends, or a combination of both.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy This Upgrade?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe High-Pressure Fuel Pump (HPFP) on Audi systems with DI and MPI can restrict fuel flow, limiting the fuel available for the MPI robbing performance and causing a runaway low pressure fuel pump condition. Jackal Motorsports has extensively tested and perfected this MPI fuel delivery solution to eliminate bottlenecks. Constructed with ethanol-safe fuel lines, stainless clamps, and stainless fittings, this kit ensures durability and reliable performance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho Should Use This?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWhether you're a DIY enthusiast or seasoned tuner, this upgrade is for anyone looking to unlock their Audi’s full potential. However, check with your tuner to confirm compatibility with your current setup,\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eor contact Jackal Motorsports to take advantage of the switch-over discount at checkout\u003c\/span\u003e. Again, anyone running Stage 2+ or Full E Tunes should be taking advantage of this.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy Installation, Lasting Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation is straightforward and can be done in less than an hour on a cold engine. Pair this upgrade with the El Doc Dual Pump setup for full E85 support, or run up to E50 on Stage 2+ with proper tuning. Beware of fake products on the market—Jackal Motorsports delivers only quality parts and the clone products such as fuel lines out there (can burst). So if you do plan on making this yourself use a good fuel line and stainless fittings.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eUnlock more with the Jackal Motorsports MPI Fuel Delivery Upgrade—enhance your Audi with reliable fuel flow for serious power gains.\u003c\/p\u003e","brand":"Jackal Motorsports","offers":[{"title":"Default Title","offer_id":44981265629383,"sku":"JACKAL-FUELLINE-CREC","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/Jackal_Motorsports_-_MPI_Fueling_Upgrade.png?v=1742912141"},{"product_id":"ie-3-0t-tfsi-57-5mm-press-fit-supercharger-pulley-upgrade","title":"IE 3.0T TFSI 57.5mm Press-Fit Supercharger Pulley Upgrade","description":"\u003cp\u003eThe IE supercharger pulley for 3.0T V6 Audi engines is a great mod to extract more power form your supercharger. Capable of up to 492HP on it's own with a IE stage 2 single pulley tune, or combine with IE 188mm crank pulley (IEBAVJ7) (Stage 2 dual pulley) for up to a massive 548HP! These power gains are achieved by spinning the supercharger unit significantly faster than stock for higher boost levels with pulleys and proper ECU tuning.   \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLEADING FEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eIncreases supercharger RPM by 10% for single pulley\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCombine with IE 188mm crank pulley for 26% SC RPM increase\u003c\/li\u003e\n\u003cli\u003eIncreases supercharger boost levels for single \u0026amp; dual pulley tunes\u003c\/li\u003e\n\u003cli\u003eCNC machined from billet steel\u003c\/li\u003e\n\u003cli\u003eInside bore precision honed at IE  \u003c\/li\u003e\n\u003cli\u003eZinc plated to ensure no rust\u003c\/li\u003e\n\u003cli\u003eReplaces stock pulley on Eaton TVS 1320 Superchargers\u003c\/li\u003e\n\u003cli\u003eEngineered in-house using CAD modeling and FEA analysis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSUPERCHARGER PULLEY\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eIE's Supercharger Pulley Upgrade for Audi 3.0T TFSI Engines found in B8\/B8.5 S4, S5, Q5, SQ5 and C7 A6, A7 models increasing the supercharger RPM throughout the full powerband. At redline supercharger speed is increased by 1800 RPM. The IE pulley is reduces the size to 57.5mm in diameter, making it one of most aggressive and powerful on the market.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePULLEY SPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePULLEY TYPE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSUPERCHARGER PULLEY DIAMETER    \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCRANK PULLEY DIAMETER    \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eSUPERCHARGER RATIO    \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock Pulley\u003c\/td\u003e\n\u003ctd\u003e63.20\u003c\/td\u003e\n\u003ctd\u003e162.25\u003c\/td\u003e\n\u003ctd\u003e2.5672\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle pulley (SC pulley only)\u003c\/td\u003e\n\u003ctd\u003e57.5\u003c\/td\u003e\n\u003ctd\u003e162.25\u003c\/td\u003e\n\u003ctd\u003e2.8217\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Pulley (SC + 188mm crank pulley)    \u003c\/td\u003e\n\u003ctd\u003e57.5\u003c\/td\u003e\n\u003ctd\u003e188\u003c\/td\u003e\n\u003ctd\u003e3.2695\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDual Pulley (207mm crank pulley)\u003c\/td\u003e\n\u003ctd\u003e63.20\u003c\/td\u003e\n\u003ctd\u003e207\u003c\/td\u003e\n\u003ctd\u003e3.2753\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003e\u003cbr\u003eIf you want to jump straight to Stage 2 dual pulley power, IE 207mm crank pulley IEBAVJ6 can be used instead without the need to purchase this smaller press-on SC pulley.\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHAT'S INCLUDED \u0026amp; WHAT'S SOLD SEPARATELY\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eThe following items are included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e1X) IE 57.5mm overdrive supercharger pulley\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cstrong\u003eThe following items are not included but required:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIE stage 2 single or dual pulley ECU tune\u003c\/li\u003e\n\u003cli\u003eIE 3.0T supercharger pulley puller tool (IEBAVJ4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINSTALLATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThe factory and IE supercharger pulleys are a press-fit design. Installation requires removal of the stock pulley using an IE pulley puller tool and properly heating the new IE pulley. Due to the hardware and tools required, professional installation is recommended. \u003ca href=\"https:\/\/cdn.performancebyie.com\/guides\/IE%20Audi%203.0T%20IEBAVJ1A%20Supercharger%20Pulley%20Install%20Guide.pdf\" title=\"IE Audi 3.0T Supercharger Pulley Install Guide | Press Fit\"\u003e\u003cstrong\u003eOur full install guide is located HERE. \u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFITMENT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudi S4 2009-2016 (B8\/B8.5) 3.0T\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudi S5 2013-2015 (B8\/B8.5) 3.0T\u003c\/li\u003e\n\u003cli\u003eAudi S5 Convertible 2008-2015 (B8\/B8.5) 3.0T\u003c\/li\u003e\n\u003cli\u003eAudi SQ5 2012-2017 (B8\/B8.5) 3.0T\u003c\/li\u003e\n\u003cli\u003eAudi Q5 2008-2017 (B8\/B8.5) 3.0T\u003c\/li\u003e\n\u003cli\u003eAudi A6 2012-2016 (C7) 3.0T*\u003c\/li\u003e\n\u003cli\u003eAudi A7 2011-2016 (C7) 3.0T*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e*2016-2018 A6 \u0026amp; A7 3.0T engines and some late model ROW (non-US) S4\/S5 are equipped with a different engine (CREC) is not compatible with IE press-on supercharger pulley. Please see our 3.0T CREC 4-bolt supercharger pulley for these model years. CREC engines are easily identified as the supercharger pulley has 4 bolts to attach it to the supercharger instead of a press-fit style.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e \u003cb\u003eWARNING\u003c\/b\u003e\u003cspan style=\"font-weight: 400;\"\u003e:\u003cspan\u003e \u003c\/span\u003e\u003c\/span\u003e\u003ci\u003e\u003cspan style=\"font-weight: 400;\"\u003eWarranty VOID if a non-IE puller tool (part numberIEBAVJ4) is used to remove your pulley. Using any other tool other than the IE unit will DEFINITELY destroy your pulley. DO NOT ATTEMPT TO REMOVE IE PULLEY WITHOUT IE BRAND PULLER TOOL.\u003c\/span\u003e\u003c\/i\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":46216574599367,"sku":"IEBAVJ1C","price":198.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/iebavj1a_sc_pulley_04.1510968637.png?v=1771890175"},{"product_id":"tgk-motorsport-high-pressure-fuel-pump-piston-upgrade-kit-audi-3-0t-supercharged","title":"TGK Motorsport High Pressure Fuel Pump Piston Upgrade Kit - Audi 3.0T Supercharged","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDOES NOT FIT 3.0T CREC!\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUnlock the full potential of your Audi 3.0T engine with the TGK Motorsport High Pressure Fuel Pump Piston Upgrade Kit. This kit is designed as a direct replacement for the factory high-pressure fuel pumps in the B8\/B8.5 S4\/S5\/Q5\/SQ5, delivering a significant improvement in fuel flow. By upgrading the piston, the fuel system's capacity increases, allowing for higher performance when using ethanol (E85), race fuel, or optimized pump gas tunes.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eLarger piston diameter for improved fuel delivery:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e~36.27% Increase of Flow\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eStock Pump: 9.98mm (Area: 78.23MM\u003csup\u003e2\u003c\/sup\u003e)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTGK Motorsport Pump:\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e11.65mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(Area:\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"256\" data-start=\"241\"\u003e106.596 mm²\u003c\/strong\u003e)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRaises factory fueling limits, making it perfect for high-performance Audi 4.0T engines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOptimized fuel flow to meet the demands of E85 and high-octane fuels\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePrecision-machined internals, built for high performance and reliability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHardened Tool Steel with DLC coated piston for reduced friction and extended durability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eElevate your Audi’s performance with the TGK Motorsport High Pressure Fuel Pump Piston Upgrade Kit, designed to push the boundaries of your vehicle's fuel system capabilities.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat’s Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e1 x Piston \/ Top Hat \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x 3.0T Seals\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x 3.0T Tappet (Cam Rollers)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e1 x 3.0T HPFP Tool \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TGK Motorsport","offers":[{"title":"Default Title","offer_id":46367613354183,"sku":"TGK-0309-02","price":636.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/Main_2d9d9125-a39b-402c-9b5b-fb274039cb639.webp?v=1775152736"},{"product_id":"amtuned-head-stud-kit-by-point-one-manufacturing-for-audi-ea837-ea839","title":"AMTuned Head Stud Kit by Point One Manufacturing for Audi EA837 \u0026 EA839","description":"\u003cp\u003eHigh quality American made head stud kit for the EA837 3.0 Supercharged and EA839 3.0 \u0026amp; 2.9 Turbocharged platforms, produced by Point One Manufacturing for AMTuned. All kits are pre-packaged by P1 in house to include all hardware (Studs, washers, nuts), Installation instructions, and lubricant. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur head stud kits are specially made to provide an extremely high clamp load over the factory head bolts while maintaining a lower final torque spec to protect the fragile thread inserts in these blocks. Manufactured to exceed industry standards with confirming threads and clamp load testing all done prior to being released to the public. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMaterial specs are P1 Grade H-11 270,000psi Tool Steel\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16x M10 Head Studs\u003c\/li\u003e\n\u003cli\u003e16x Washers\u003c\/li\u003e\n\u003cli\u003e16x 12mm 12pt Fastening Nuts\u003c\/li\u003e\n\u003cli\u003eLubricant\u003c\/li\u003e\n\u003cli\u003eInstallation Instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AMTuned","offers":[{"title":"Default Title","offer_id":46551055171783,"sku":null,"price":789.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/A38A7698-D16F-42E1-A8B2-108933017C36_2048x2048_6576a0a7-3f08-417d-9110-2308f364be9e.webp?v=1778879229"}],"url":"https:\/\/garageautosports.com\/en-eu\/collections\/8r-q5-sq5-engine.oembed","provider":"Garage Auto Sports","version":"1.0","type":"link"}