Spare Wheel Nut Set For GAS Titanium Wheel Studs
Wheel Nut Style
R13 Ball Seat (for OEM or OEM-style wheels)
60 Degree Cone Seat (for most aftermarket wheels)
Choose options
R13 Ball Seat (for OEM or OEM-style wheels) - €176,95
60 Degree Cone Seat (for most aftermarket wheels) - €176,95
In stock (or available for preorder)
Ditch your heavy, ugly stock wheel bolts or rusty steel stud conversion and do your build some justice! We've been running these titanium alloy studs on both street and track cars (including dedicated time attack and drag cars) for years with zero issues. Unlike 100% titanium bolts/studs, our Ti-6Al-4V alloy is much stronger than comparable steel counterparts.
Lightweight:
Stock wheel bolt: 0.1kg (100g) / 0.2lb (4oz)
Titanium stud/nut combo: 0.045kg (45g) / 0.1lb (2oz)
Total rotational/unsprung weight savings: 1.1kg (1100g) / 2.4lb (39oz)
High Strength:
GAS Titanium wheel studs: 950 mPa (138,000 psi)
Stock wheel bolts: 540 mPa (78,300 psi)
Features:
70mm overall length
~40mm of available thread, measured from the brake disc face
Less than half the weight of OEM bolts
Machined from Ti-6Al-4V aerospace grade titanium alloy
Rolled threads for high strength & reliability
Faster & easier wheel changes, no more balancing your wheel while lining up the bolts
Titanium-vanadium composition is nearly twice as strong as OEM steel bolts
Extremely high resistance to corrosion, perfect for areas with salt on the roads
Threads rolled to a strict 6g/6H tolerance
Allows the use of up to 15mm wheel spacers (wheel-dependent)
Offered for both stock and aftermarket wheel fitment
Head: 17mm (12 point)
Installation:
Remove wheels
If your hubs are rusty, cleaning the threads with an M14x1.5 tap before installation is highly recommended
Install GAS wheel studs with supplied loctite on short threads
Torque studs into hubs to 15nm using a 4mm hex socket
Install spacers (if applicable) and wheels onto the new studs
Torque wheel nuts to factory specifications
Includes:
20x M14x1.5 Titanium wheel studs
20x M14x1.5 Titanium wheel nuts
Wheel nut socket
Fitment:
Audi A3/S3/RS3 8L/8P/8V/8Y
Audi TT/TTS/TTRS 8N/8J/8S
Audi A4/S4/RS4 C4/B5/B6/B7/B8/B9
Audi A5/S5/RS5 B8/B9
Audi A6/S6/RS6 C4/C5/C6/C7/C8
Audi A7/S7/RS7 C7/C8
Audi A8/S8 D2/D3/D4/D5
Audi Q5/SQ5 8R/FY
Audi Q7/SQ7/Q8/SQ8/RSQ8
Audi R8 MK1/MK2 (42/4S)
Lamborghini Huracan (all models excl. center-lock)
Lamborghini Gallardo (all models)
Lamborghini Urus
VW Golf/GTI/R MK4/MK5/MK6/MK7/MK8
VW Jetta/GLI MK4/MK5/MK6/MK7/MK8
VW Passat B5/B6/B7/B8/B9
VW Tiguan 5N/AD/BW
Porsche (cone seat wheels only, will not fit R14 ball seat)
Mercedes (cone seat wheels only, will not fit R12 ball seat)
Other makes/models using M14x1.5 wheel bolts
More fitments added every day. Send us a message if you don’t see your vehicle listed
Note: If running aftermarket wheels, please verify your bolt/nut seat before ordering!