{"title":"MK6 Golf\/GTI\/R Engine","description":"","products":[{"product_id":"gas-vw-audi-ea113-fsi-hpfp-inlet-high-flow","title":"GAS VW\/Audi EA113 FSI HPFP Inlet, High Flow","description":"\u003cp\u003eWhen we set out to find every fuel system restriction in the FSI platform, we left no stone unturned. After taking apart the HPFP we were shocked to find that the inlet measured out at less than 1.5mm! When compared with OEM HPFP inlets on the TSI platform as well as other VWAG platforms such as the Audi 3.0T, the difference was staggering. The FSI inlet is microscopic by comparison. \u003c\/p\u003e\n\u003cp\u003eThese suspicions were backed up by logs from 3 big turbo MK6Rs and a big turbo B7 A4 on our in-house Mustang dyno. At higher engine speeds the fuel flow into the pump can't keep up, causing low-pressure readings to drop sharply as pump demand increases. This issue is worked around by larger in-tank pumps or HPFP inserts, but even with APR HPFPs, Hellcat in-tank pumps and upgraded controllers, the same issue persisted. The LPFP pump simply cannot flow enough fuel into the HPFP to prevent the high-pressure pump from being drained faster than it can refill.\u003c\/p\u003e\n\u003cp\u003eBy replacing the inlet with our high-flow version we were able to see massive improvements in low-pressure readings at higher pump demands. Our pump fitting boasts an internal diameter of 5.5mm for an increase of \u003cstrong\u003e366%\u003c\/strong\u003e over the stock fitting! In our opinion, this is the most overlooked bottleneck in the FSI fuel system but the first one that should be replaced.\u003c\/p\u003e\n\u003cp\u003eThis fitting upgrade has been dyno-tested and proven to support a reliable 620bhp\/500awhp with no auxiliary fueling (port fuel, WMI, etc) on the same vehicles that previously had shut-down issues due to fuel pressure dropping outside of specification. This is \u003cstrong\u003enot \u003c\/strong\u003ea substitute for a proper MPI or high-flow WMI setup, but is an important upgrade for higher power Stage 2\/Stage 2+\/Mild Stage 3 setups that aren't quite ready for auxiliary fueling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Spec: 30nm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: We supply only brand-new Hitachi fittings, not a used part taken off of another pump! Make sure the original sealing washer remains inside the HPFP during replacement.\u003c\/em\u003e\u003c\/p\u003e","brand":"Garage Auto Sports","offers":[{"title":"Default Title","offer_id":43084827394247,"sku":"GAS-FSI-HPFP-IN","price":39.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/products\/06f-127-025-m-hit.jpg?v=1678046414"},{"product_id":"apr-ignition-coil-pq35-style","title":"APR Ignition Coil, PQ35 Style","description":"\u003cp\u003eAPR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. The commonplace replacement of factory ignition coils with those taken from the higher output Audi R8 is popularly believed to provide greater energy output. However, testing proves that they are no more powerful than the factory coils that are found on other engines. APR Ignition Coils increase energy output by up to 10% over stock. They are a direct upgrade or replacement, and come with a unique red housing!\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 10% more energy output than stock\u003c\/li\u003e\n\u003cli\u003eRed housing with APR Logo\u003c\/li\u003e\n\u003cli\u003eTrue upgrade, not just aesthetic\u003c\/li\u003e\n\u003cli\u003eDirect plug-and-play\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePLEASE NOTE - If your factory ignition coils look physically different, other than color, these upgrades are not compatible. Please make sure your coil style matches before ordering!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2005-2023 VW\/Audi\/Lamborghini models with PQ35 coils\u003c\/li\u003e\n\u003cli\u003e8L Audi A3\/S3\/TT 1.8T\u003c\/li\u003e\n\u003cli\u003e8P Audi A3\/S3\/RS3 2.0T\/2.5T\u003c\/li\u003e\n\u003cli\u003eB6 Audi A4 1.8T\/3.0 \u003cspan data-mce-fragment=\"1\"\u003e(coils may be too tall for 4.2 S4)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eB7 Audi A4 2.0T\/3.2 (coils may be too tall for 4.2 S4)\u003c\/li\u003e\n\u003cli\u003eB8\/B8.5 Audi A4\/A5 2.0T\/3.2\/3.0T\u003c\/li\u003e\n\u003cli\u003eB8\/B8.5 Audi S4\/S5 3.0T\/4.2 FSI\u003c\/li\u003e\n\u003cli\u003e8R Q5\/SQ5 2.0T\/3.2\/3.0T\u003c\/li\u003e\n\u003cli\u003eC6 Audi A6\/S6 3.2\/3.0T\/5.2 FSI\u003c\/li\u003e\n\u003cli\u003eC7 Audi A6\/A7 3.0T\u003c\/li\u003e\n\u003cli\u003eD3 Audi A8 4.2 FSI\u003c\/li\u003e\n\u003cli\u003eD4 Audi A8 3.0T\u003c\/li\u003e\n\u003cli\u003eMK4 VW Golf\/Jetta\/GTI 1.8T\u003c\/li\u003e\n\u003cli\u003eMK5 VW Golf\/Jetta\/GTI\/Rabbit 2.0T\/2.5\u003c\/li\u003e\n\u003cli\u003eMK6 VW Golf\/Jetta\/GTI\/R 2.0T\/2.5\u003c\/li\u003e\n\u003cli\u003eAll VW models with 2.0TFSI\/2.0TSI EA113\/EA888.1\/EA888.2\u003c\/li\u003e\n\u003cli\u003eMK1\/42 Audi R8 4.2\/5.2 FSI\u003c\/li\u003e\n\u003cli\u003eMK2\/4S Audi R8 5.2 FSI\u003c\/li\u003e\n\u003cli\u003eLamborghini Gallardo LP 5.2 FSI\u003c\/li\u003e\n\u003cli\u003eLamborghini Huracan 5.2 FSI\u003c\/li\u003e\n\u003cli\u003ePorsche models with PQ35 coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKnown OEM PQ35 part numbers:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e06D905115\u003c\/li\u003e\n\u003cli\u003e06D905115A\u003c\/li\u003e\n\u003cli\u003e06D905115C\u003c\/li\u003e\n\u003cli\u003e06D905115D\u003c\/li\u003e\n\u003cli\u003e06D905115F\u003c\/li\u003e\n\u003cli\u003e06D905115G\u003c\/li\u003e\n\u003cli\u003e06D905115K\u003c\/li\u003e\n\u003cli\u003e06E905115A\u003c\/li\u003e\n\u003cli\u003e06E905115B\u003c\/li\u003e\n\u003cli\u003e06E905115C\u003c\/li\u003e\n\u003cli\u003e06E905115D\u003c\/li\u003e\n\u003cli\u003e06E905115E\u003c\/li\u003e\n\u003cli\u003e06E905115F\u003c\/li\u003e\n\u003cli\u003e06E905115G\u003c\/li\u003e\n\u003cli\u003e06F905115C\u003c\/li\u003e\n\u003cli\u003e06F905115E\u003c\/li\u003e\n\u003cli\u003e06F905115F\u003c\/li\u003e\n\u003cli\u003e06H905115B\u003c\/li\u003e\n\u003cli\u003e07K905715D\u003c\/li\u003e\n\u003cli\u003e07K905715E\u003c\/li\u003e\n\u003cli\u003e07K905715F\u003c\/li\u003e\n\u003cli\u003e07K905715G\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR","offers":[{"title":"Red","offer_id":43247076573383,"sku":"APR-MS100208","price":52.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43247076606151,"sku":"APR-MS100209","price":52.95,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":43247076638919,"sku":"APR-MS100210","price":52.95,"currency_code":"USD","in_stock":false},{"title":"Grey","offer_id":43247076671687,"sku":"APR-MS100211","price":52.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/ms100208_001.jpg?v=1686675125"},{"product_id":"billet-oil-filter-housing-ea113-tfsi","title":"Billet Oil Filter Housing, EA113 TFSI","description":"\u003cp\u003eGet rid of your leaking plastic oil filter housing on your 2.0T FSI and add some reliability to your life! This billet housing completely replaces the stock EA113 plastic oil filter housing and oil cooler, utilizing a spin-on 06A type oil filter. Includes 2x -10AN ports for use with an external oil cooler of your choice. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e06A filter compatibility\u003c\/li\u003e\n\u003cli\u003e2x -10AN oil cooler ports\u003c\/li\u003e\n\u003cli\u003eExtra side ports for mounting an additional oil pressure sensor (handy for Syvecs installs or an external gauge)\u003c\/li\u003e\n\u003cli\u003eFull billet construction, making this a one-and-done solution to oil filter housing leaks that plague the EA113\u003c\/li\u003e\n\u003cli\u003e-10AN PCV breather port\u003c\/li\u003e\n\u003cli\u003eWater fitting to maintain factory coolant flow through the block once the stock oil cooler is removed\u003c\/li\u003e\n\u003cli\u003eBuilt-in internal thermostat for oil cooler\u003c\/li\u003e\n\u003cli\u003eMaximizes space in front of the engine\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment: All EA113 2.0TFSI engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2006-2008 Audi A4 2.0TFSI\u003c\/li\u003e\n\u003cli\u003e2006-2008 VW GTI 2.0TFSI\u003c\/li\u003e\n\u003cli\u003e2012-2013 Golf R 2.0TFSI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWill not fit EA888 TSI engines\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepending on stock availability, these housings may need to be made per-order. This is for an older platform and shipping times may exceed 4-6 weeks in some cases. We cannot guarantee lead times on this product. By placing your order you agree to these terms.\u003c\/strong\u003e\u003c\/p\u003e","brand":"iABED Industries","offers":[{"title":"Default Title","offer_id":43828419264711,"sku":"","price":689.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/2E328119-4080-477B-BB8B-A62FD2172398.jpg?v=1709866592"},{"product_id":"stage-3-dual-lpfp-upgrade-mk6r-ea113","title":"Stage 3 Dual LPFP Upgrade, MK6R EA113","description":"\u003ch3\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUtilizes (2) Walbro 450 fuel pumps, flowing up to 725LPH @ 40PSI\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the stock LPFP assembly\u003c\/li\u003e\n\u003cli\u003eSupports builds in the 700-1100whp range\u003c\/li\u003e\n\u003cli\u003e100% Ethanol compatible\u003c\/li\u003e\n\u003cli\u003eCan be used with stock ECU or Syvecs setups\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePerfect for MPI setups \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cstrong\u003eI\u003c\/strong\u003e\u003cstrong\u003encludes:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStage 3 drop-in LPFP assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware\u003c\/li\u003e\n\u003cli\u003eFuel filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAll units come pre-assembled and pre-wired.  This is a\u003c\/span\u003e\u003cb\u003e\u003cspan\u003e \u003c\/span\u003e\u003cu\u003e\"Drop-In\"\u003c\/u\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003epump that is easy to handle in the comfort of your own garage\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis pump upgrade requires the use of a PM4 pump controller. Please do not try to use this kit with the stock controller! It will overheat and you will lose fuel pressure at the worst time. We offer PM4 controller kits \u003ca href=\"https:\/\/garageautosports.com\/collections\/mk6-golf-gti-r-engine\/products\/pm4-high-power-lpfp-control-module\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eF\u003c\/strong\u003e\u003cstrong\u003eitment:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A3 2006 to 2013 (Quattro)\u003c\/li\u003e\n\u003cli\u003eAudi TT 2008 to 2015 (Quattro)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudi TTRS 2014\u003c\/li\u003e\n\u003cli\u003eAudi TTS 2014 to 2015\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVolkswagen Golf R 2012 to 2013\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Precision Raceworks","offers":[{"title":"Default Title","offer_id":44664668324039,"sku":"601-0162","price":979.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/mk6-audi-vw-performance-fuel-pump.webp?v=1730484165"},{"product_id":"direct-injector-cleaning-service","title":"Direct Injector Cleaning Service","description":"\u003cp\u003eIf you're having injector issues including black smoke, poor fuel mileage or misfires, it's likely that your injectors need some love. We are proud to offer fuel injector cleaning services for both direct and port injectors in-house at our Ontario, Canada location!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProcess:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlace your order for a quantity that matches the number of injectors you will be sending (6 = 6 injectors, 4 = 4 injectors, etc). If you opted for new seals, please include your VIN in the order notes to prevent delays. Once your order is placed, box up your injectors and send them to us \u003ca href=\"https:\/\/garageautosports.com\/pages\/contact-us\" target=\"_blank\" rel=\"noopener\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAs soon as we receive your injectors we will run an initial test, measuring the effective flow rate and evaluating the spray pattern and removing the old seals.\u003c\/p\u003e\n\u003cp\u003eYour injectors will then receive our full spa treatment, with an internal and external ultrasonic cleaning under our specific variety of operating conditions, a full back purge, and finally a second flow test and spray pattern evaluation.\u003c\/p\u003e\n\u003cp\u003eOnce clean, the injectors will be packaged up and send back to you along with a copy of your test results \u0026amp; evaluations. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are responsible for shipping your injectors to us. The shipping cost you pay at checkout will cover return shipping to you\u003c\/li\u003e\n\u003cli\u003eWe will treat your injectors as if they were our own, but we are not responsible for any damage that occurs during shipping. Package your injectors carefully!\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis service covers injector cleaning, not repair. If you have a dead injector that does not function, we will contact you before proceeding\u003c\/li\u003e\n\u003cli\u003eWe will also clean port\/MPI injectors for the same cost\u003c\/li\u003e\n\u003cli\u003eNew injector seal kits can be provided if desired. Include your VIN and we will update your order with the new seals\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003ePrice is per injector, order the number of injectors you have\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garage Auto Sports","offers":[{"title":"Yes; I would like a quote on new seals (VIN required)","offer_id":44930175795399,"sku":"INJ-CLEAN-SEAL","price":39.95,"currency_code":"USD","in_stock":true},{"title":"No; I will source my own seals","offer_id":44930175828167,"sku":"INJ-CLEAN","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/RS4fuelinjector.jpg?v=1740758810"}],"url":"https:\/\/garageautosports.com\/en-eu\/collections\/mk6-golf-gti-r-engine.oembed","provider":"Garage Auto Sports","version":"1.0","type":"link"}