{"title":"C7 A6\/A7 Engine","description":"","products":[{"product_id":"cts-turbo-audi-3-0t-192mm-crank-pulley-upgrade-kit","title":"CTS Audi EA837 3.0T 192mm Crank Pulley Upgrade Kit","description":"\u003cp\u003eThe CTS pulley upgrade is a larger diameter than stock and is made from precision billet T66061 aluminum. It replaces the two-piece design of the failure-prone stock pulley and also reduces the rotational mass of the crank, freeing up horsepower.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe larger diameter pulley will increase the speed at which the supercharger spins and will increase the boost pressure output. Increased boost pressure in conjunction with upgraded ECU software results in a dramatic increase in horsepower and torque throughout the entire powerband. This will not increase stress or excessive wear on the supercharger or engine components.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNOTE: This kit must be used with appropriate Stage 2+ performance software. An upgraded heat exchanger is required!\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp\u003eStage 2+ performance software will allow you to achieve maximum boost and power from your 3.0T while safely optimizing air-fuel ratios, timing, and boost pressure bleed-off. This is the same pulley we use in our 605bhp E40 packages.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMost Stage 2+ software tunes are compatible with this kit. Be sure to use the correct software for 192mm pulley selected.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in-house at CTS Turbo, in Canada\u003c\/li\u003e\n\u003cli\u003ePrecision CNC machined from billet T66061 aluminum.\u003c\/li\u003e\n\u003cli\u003eOEM-spec honing and tolerances\u003c\/li\u003e\n\u003cli\u003eReplacement crank pulley belt\u003c\/li\u003e\n\u003cli\u003eAnodized black for a long-lasting OEM-looking finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCTS Turbo Crank Pulley (192mm)\u003c\/li\u003e\n\u003cli\u003e8 x Grade 12.9 bolts\u003c\/li\u003e\n\u003cli\u003e1 x Bando belt (Made in the USA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong\u003eApplications: Audi EA837 3.0T\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS4 B8\/B8.5 (2010-2016)\u003c\/li\u003e\n\u003cli\u003eS5 B8\/B8.5 (2010-2016)\u003c\/li\u003e\n\u003cli\u003eSQ5 B8 (2014+)\u003c\/li\u003e\n\u003cli\u003eQ5 B8 (2009+)\u003c\/li\u003e\n\u003cli\u003eA6 C6 (2005.5 – 2011)\u003c\/li\u003e\n\u003cli\u003eA6 C7 (2012+)\u003c\/li\u003e\n\u003cli\u003eA7 C7 (2012+)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":42691972104391,"sku":"CTS-HW-266-192","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/products\/CTS-HW-266-180-1-1.jpg?v=1662872258"},{"product_id":"gas-billet-supercharger-clutch-delete-audi-crec-3-0t","title":"GAS Billet Supercharger Clutch Delete, Audi CREC 3.0T","description":"\u003ch2\u003eThe original billet supercharger clutch delete for your CRE-powered 3.0T!\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eCURRENT BATCH EXPECTED TO SHIP: APRIL 1ST\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEliminate reliability issues\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003eStock and tuned CRE engines all suffer from the same fate of a slipping supercharger clutch. By removing the clutch from the equation we've created a solid mechanical connection between the supercharger pulley and the supercharger itself. This is the last CRE clutch replacement you'll ever need.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnlock higher levels of power\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003eDue to clutch slipping issues, CRE owners have been forced to run lower stages of tuning, putting dual pulley and even some single pulley tunes out of reach! Many owners have even resorted to welding the clutch together, creating the possibility of a cracked weld or imbalanced rotating assembly. We've removed this uncertainty completely with our machined billet clutch replacement. CREC owners are now free to run any stage they wish, pursuing power levels only attained by non-clutched 3.0T models!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight Savings\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003eAt a weight of \u003cstrong\u003e1.4lbs\u003c\/strong\u003e, our billet clutch delete frees up rotating mass, allowing your engine to rev up faster with less resistance!\u003c\/p\u003e\n\u003cp\u003eWith a capable dual-port injection system and flex-fuel capability, the CRE engine is a venerable powerplant with a big Achilles heel. Don't let a weak clutch hold your CRE back!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupport Innovation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAlthough other companies have since released their own version of the CREC clutch delete, we remain the first to design, develop, and bring to market this innovative solution for the age-old problem of supercharger clutch slip.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe selected 7075 aluminum over steel or other materials for its excellent characteristics for this specific application. \u003cspan style=\"font-size: 0.875rem;\"\u003e7075 is commonly used in Aerospace and Defense applications for gears, shafts and sprockets where an uncompromising, corrosion resistant material is required. \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eUnlike the 6000-grade aluminum commonly used in the automotive industry, 7075 has superior durability, high compressive strength, and higher tensile strength than most grades of steel and titanium, making it great for use as a high-speed pulley with a single mounting nut that runs the risk of deformation due to rotational stresses.  Using precision machining and wire EDM technology, we ensure a perfect fit every time with better tolerances than OEM! The proof is in the pudding with zero failures or issues after years of hard abuse in CRE engines around the world.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility: All EA837 Evo Equipped Audi\/Porsche vehicles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2014+ S4\/S5 with CRE- engine (Euro market)\u003c\/li\u003e\n\u003cli\u003e2016+ A6\/A7 with CRE- engine\u003c\/li\u003e\n\u003cli\u003e2017+ Audi Q7\/Q8 with CRE- engine\u003c\/li\u003e\n\u003cli\u003e2015+ Audi A8 with CRE- engine\u003c\/li\u003e\n\u003cli\u003eReplaces CREC, CREA, CREH, CRGE, CTDA with 06E145105N \u0026amp; 06E145105S magnetic clutch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThis clutch delete will require tuning to prevent a check engine \/ MIL. Please verify that your tuning company is able to offer specific tuning for this modification before purchasing!\u003c\/em\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/CREC_Billet_Clutch_Delete_Install_Instructions_v1.3.pdf?v=1760886240\" target=\"_blank\"\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Garage Auto Sports","offers":[{"title":"Default Title","offer_id":43381883240647,"sku":"GAS-CREC-CLD","price":449.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/IMG-1125.png?v=1736742657"},{"product_id":"precision-raceworks-mpi-kit-ea837-audi-3-0t-supercharged","title":"Precision Raceworks MPI Kit, EA837 Audi 3.0T Supercharged","description":"\u003cp\u003eThe Precision Raceworks Multiport Injection (MPI) kit with flex fuel compatibility is a necessity to safely and sufficiently support the power levels of anyone needing additional fueling. This kit is capable of providing supplemental fueling to all 2009-2016 3.0 TFSI Audis.\u003cbr\u003e\u003cbr\u003eThe complete kit integrates seamlessly into your car as if it left the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors which are flow-matched both static and dynamic to within 2%. A Detailed certificate of conformance is included with each kit giving you all flow data needed for optimal tuning.\u003cbr\u003e\u003cbr\u003eAdditionally, this kit opens the runners increasing air volume in the ports and deletes the flaps which allows more linear air flow. This kit features 750cc* injectors standard (this flow rate is based on industry injector flow test pressure of 43.5psi) at 72psi these injectors flow 1000cc. What this means is fueling will never be an issue for the platform again!\u003cbr\u003e\u003cbr\u003eSimply pick up this kit and pair it with your favorite injector controller and you are ready to go! We recommend the Motiv Reflex, which is compatible with all 3.0TFSI vehicles and is loaded with features.\u003c\/p\u003e\n\u003cp\u003eKits will come in \u003cstrong\u003eanodized black\u003c\/strong\u003e, red is for display purposes only.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment: All EA837-equipped Audi 3.0T engines (not including EA837 EVO)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2009-2016 B8\/B8.5 S4\/S5 3.0T (non-CRE)\u003c\/li\u003e\n\u003cli\u003e2013-2016 8R Q5\/SQ5 3.0T (non-CRE)\u003c\/li\u003e\n\u003cli\u003e2009-2011 C6.5 A6 3.0T\u003c\/li\u003e\n\u003cli\u003e2012-2015 C7 A6\/A7 3.0T (non-CRE)\u003c\/li\u003e\n\u003cli\u003e2009-2015 4L Q7 3.0T\u003c\/li\u003e\n\u003cli\u003e2013-2015 D4 A8 3.0T (non-CRE)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Precision Raceworks","offers":[{"title":"Default Title","offer_id":43732022689991,"sku":"601-0243","price":1899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/B8BlackMPI1.webp?v=1711453652"},{"product_id":"audi-ea837-3-0t-sai-delete-plate-set","title":"Audi EA837 3.0T SAI Plate Set","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eFor offroad use only! Please respect your local emissions laws.\u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003c\/em\u003eSecondary air issues plaguing your supercharged Audi 3.0T? This set of billet SAI plates allows you to completely remove your SAI system including all hoses, valves, and pump (with proper tuning), greatly increasing serviceability and reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: We recommend leaving the SAI solenoids installed \u0026amp; connected to limit faults. Install the provided caps onto each solenoid during installation.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eImproves access to the PCV area and rear timing covers, turning an 11-hour timing cover reseal into a 2-hour job\u003c\/li\u003e\n\u003cli\u003ePrevents the common SAI flow faults that occur regularly on the 3.0T engine\u003c\/li\u003e\n\u003cli\u003eEliminates breakage of the brittle SAI pipes during carbon cleaning or PCV, thermostat and water pump replacement\u003c\/li\u003e\n\u003cli\u003eProvides easy access to all rear components including oxygen sensor connectors, oil filter housing and more\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet SAI plates with o-rings x2\u003c\/li\u003e\n\u003cli\u003eStainless cap screws x4\u003c\/li\u003e\n\u003cli\u003eVacuum caps for top port of SAI solenoids x2 (B8.5 will only use 1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment: \u003c\/strong\u003e\u003cstrong\u003eAll EA837 3.0T engines\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eB8 S4\/S5 3.0T\u003c\/li\u003e\n\u003cli\u003eB8.5 S4\/S5 3.0T\u003c\/li\u003e\n\u003cli\u003eC6 A6 3.0T\u003c\/li\u003e\n\u003cli\u003eC7 A6\/A7 3.0T\u003c\/li\u003e\n\u003cli\u003eD4 A8 3.0T\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eDoes not fit EA837Evo (CRE) engines without modification. New version coming soon!\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eTorque: 9nm with blue loctite\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease refer to the diagrams below for installation:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"401\" width=\"556\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/SAI_Valves_EA837-1_Plate_Locations.png?v=1710263670\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"402\" width=\"557\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/SAI_Valves_EA837-1_Removed.png?v=1710263670\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"335\" width=\"555\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/SAI_Valves_EA837-2.png?v=1710263670\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Garage Auto Sports","offers":[{"title":"Default Title","offer_id":43819359961287,"sku":"GAS-SAI-EA837","price":79.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/FullSizeRender_cceae108-d675-4579-942c-3fb89a320ca9.jpg?v=1737568876"},{"product_id":"gas-griptech-crec-supercharger-pulley-57-6mm","title":"GAS Griptec CREC Supercharger Pulley, 57.6mm","description":"\u003cp\u003eThis pulley upgrade is the result of a development project between GAS and ZPE to find a solution to belt slip for your CREC-powered Audi 3.0T! The ideal upper pulley size paired with ZPE’s most aggressive race coating, this is the final solution for belt slip.\u003c\/p\u003e\n\u003cp\u003eThe patented Griptec Coating by ZPE ensures that even when pushed to aggressive pulley ratios with our you can still avoid belt slip.\u003c\/p\u003e\n\u003cp\u003eYour current belt can be re-used (will differ based on lower pulley size). If you need a new belt, we offer them \u003ca href=\"https:\/\/garageautosports.com\/products\/supercharger-belt-audi-3-0t-various-sizes\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eHate clutch slip? Don't forget to pair this Griptec pulley with our \u003ca href=\"https:\/\/garageautosports.com\/collections\/c7-a6-s6\/products\/gas-billet-supercharger-clutch-delete-audi-crec-3-0t\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eBillet Clutch Delete\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eMachined and coated in the USA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGriptec-coated supercharger pulley\u003c\/li\u003e\n\u003cli\u003e4x ARP bolts (10mm 12-point socket required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Audi 3.0T Supercharged engines with 4-bolt supercharger pulleys\u003c\/li\u003e\n\u003cli\u003eThis will \u003cspan style=\"text-decoration: underline;\"\u003enot\u003c\/span\u003e work as a replacement for press-on style pulleys\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTorque Spec is 32nm (24ft-lbs) for the ARP bolts\u003c\/strong\u003e\u003c\/p\u003e","brand":"Garage Auto Sports","offers":[{"title":"Default Title","offer_id":44118883696839,"sku":"GAS.AR576M3AZ7","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/FullSizeRender_1d97cc0e-f5da-4270-9dc4-0aa4fd093083.jpg?v=1755742853"},{"product_id":"supercharger-belt-audi-3-0t-various-sizes","title":"Supercharger Belt, Audi 3.0T Various Sizes","description":"\u003cp\u003eWe carry replacement supercharger belts for most pulley combinations! \u003c\/p\u003e\n\u003cp\u003eSee our chart below for general belt sizing. Note that an upgraded upper pulley size will generally not change the belt size, with some exceptions. We will keep this list updated as we test different setups and combos.\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--td {border: 1px solid #cccccc;}br {mso-data-placement:same-cell;}--\u003e\u003c\/style\u003e\n\u003ctable data-sheets-root=\"1\" border=\"1\" dir=\"ltr\" cellpadding=\"0\" cellspacing=\"0\" xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" style=\"width: 100%; height: 156.75px;\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"156\" style=\"width: 27.6106%;\"\u003e \u003ccol width=\"127\" style=\"width: 22.4779%;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Crank\/Upper Size\"}' style=\"height: 19.5938px;\"\u003e\u003cstrong\u003eCrank Pulley Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Belt Size\"}' style=\"height: 19.5938px;\"\u003e\u003cstrong\u003eBelt Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"Stock (162.25mm)\"}' style=\"height: 19.5938px;\"\u003eStock (162.25mm)\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"7PK1270\"}' style=\"height: 19.5938px;\"\u003e7PK1270\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"179mm\"}' style=\"height: 19.5938px;\"\u003e179mm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"7PK1290\"}' style=\"height: 19.5938px;\"\u003e7PK1290\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"187mm\"}' style=\"height: 19.5938px;\"\u003e187mm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"7PK1300\"}' style=\"height: 19.5938px;\"\u003e7PK1300 (1310 with stock upper pulley)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"189mm\"}' style=\"height: 19.5938px;\"\u003e189mm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"7PK1310\"}' style=\"height: 19.5938px;\"\u003e7PK1310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"190-192mm\"}' style=\"height: 19.5938px;\"\u003e190-192mm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"7PK1320\"}' style=\"height: 19.5938px;\"\u003e7PK1320\/1325\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"203mm\"}' style=\"height: 19.5938px;\"\u003e203mm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"7PK1350\"}' style=\"height: 19.5938px;\"\u003e7PK1345\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"207mm\"}' style=\"height: 19.5938px;\"\u003e207mm\u003c\/td\u003e\n\u003ctd data-sheets-value='{\"1\":2,\"2\":\"7PK1370\"}' style=\"height: 19.5938px;\"\u003e7PK1370\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Garage Auto Sports","offers":[{"title":"7PK1270","offer_id":44118906044615,"sku":"","price":20.0,"currency_code":"USD","in_stock":true},{"title":"7PK1290","offer_id":44118906077383,"sku":"","price":20.0,"currency_code":"USD","in_stock":true},{"title":"7PK1300","offer_id":44118906110151,"sku":"7PK1300","price":20.0,"currency_code":"USD","in_stock":true},{"title":"7PK1310","offer_id":44447195922631,"sku":"7PK1310","price":34.99,"currency_code":"USD","in_stock":false},{"title":"7PK1325","offer_id":44118906142919,"sku":"7PK1320\/7PK1325","price":20.0,"currency_code":"USD","in_stock":true},{"title":"7PK1345","offer_id":44118906175687,"sku":"7PK1345","price":20.0,"currency_code":"USD","in_stock":true},{"title":"7PK1370","offer_id":44118906241223,"sku":"7PK1370","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/Contibelt_df0bfdbb-a439-4fe0-bf18-f1a58428ec85.jpg?v=1713926520"},{"product_id":"ie-3-0t-hpfp-internal-upgrade-kit-for-audi-3-0t-supercharged-s4-s5-a6-a7-sq5-q5","title":"IE 3.0T HPFP Internal Upgrade Kit For Audi 3.0T Supercharged S4\/S5\/A6\/A7\/SQ5\/Q5","description":"\u003cp\u003e\u003cspan\u003eIE's HPFP internals upgrade kit for the Audi 3.0TFSI Supercharged engines is perfect for the DIY user looking to upgrade their factory-equipped HPFP pump body with new higher flowing internals. These USA-engineered and manufactured parts will reliably transform your stock pump housing into a high-flow fuel pump for use on dual pulley ECU tunes to provide enough flow for ethanol fuel blends. The 11.67mm piston is the largest sized diameter possible within the fuel-pump body.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHPFP internal DIY kit -upgrade your stock pump internals\u003c\/li\u003e\n\u003cli\u003eHPFP upgrade for ethanol tunes\u003c\/li\u003e\n\u003cli\u003eReliably adds a larger fuel ceiling for increased flow\u003c\/li\u003e\n\u003cli\u003eThe piston diameter increased to 11.67mm\u003c\/li\u003e\n\u003cli\u003eLargest stroke volume available\u003c\/li\u003e\n\u003cli\u003eBroken-in and bench tested on in-house pump dyno\u003c\/li\u003e\n\u003cli\u003eConstant diameter piston design for long-life operation\u003c\/li\u003e\n\u003cli\u003eRetains OE spring to avoid increased camshaft wear\u003c\/li\u003e\n\u003cli\u003eTool steel DLC-coated pin\u003c\/li\u003e\n\u003cli\u003eNitrided tool steel cylinder\u003c\/li\u003e\n\u003cli\u003eMolybdenum disulphide impregnated leak-free seal\u003c\/li\u003e\n\u003cli\u003eStainless steel seal body\u003c\/li\u003e\n\u003cli\u003eBuna-N rubber oil-resistant o ring\u003c\/li\u003e\n\u003cli\u003eIndividually tested and verified for extreme tolerances\u003c\/li\u003e\n\u003cli\u003eEngineered, designed, \u0026amp; manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":44488418623687,"sku":"IEFUVO1","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/IMG-9874.png?v=1722882624"},{"product_id":"griptec-press-on-hub-pulley-kit-audi-ea837-3-0t","title":"Griptec Hub \u0026 Pulley Kit, Audi EA837 3.0T","description":"\u003cp\u003e\u003cspan\u003eThis pulley and hub combo for your pre-CRE Audi 3.0T is the final solution for belt slip! Coated with ZPE's patented Griptec coating, slipping supercharger belts and lost boost are a thing of the past. Made from 7075-T6 aluminum (the same material our CREC clutch deletes are made of), this combo is made to last.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWe've paired this combo together to take the guesswork out of putting together a Griptec setup for your B8\/C7\/8R\/C6. We recommend pairing this upper pulley with a \u003ca href=\"https:\/\/garageautosports.com\/products\/cts-turbo-audi-3-0t-192mm-crank-pulley-upgrade-kit?_pos=1\u0026amp;_psq=192mm\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener\" target=\"_blank\"\u003e192mm Crank Pulley\u003c\/a\u003e, but it also works well with any existing crank pulley you may have. Pair with your stock crank pulley for a reliable Stage 2 setup.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation by a qualified shop is strongly recommended! This hub must be heated and slipped on like a traditional upper pulley, and may come loose if installed incorrectly or pressed without heating.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"ship-label\"\u003eBuilt to Order: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"ship-info\"\u003eOnce Ordered, Estimated Time to ship will be 5 to 7 Business Days.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGriptec 57mm supercharger pulley\u003c\/li\u003e\n\u003cli\u003eMK AU 304SS Hub fits 10 M5 screws\u003c\/li\u003e\n\u003cli\u003eT30 Custom CNC Titanium M5 screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZPE","offers":[{"title":"63mm (stock)","offer_id":46132806484167,"sku":"AU1864SR0K.AU63MBV2Z7","price":289.95,"currency_code":"USD","in_stock":true},{"title":"57mm","offer_id":46132806516935,"sku":"AU1864SR0K.AU57MBV3Z7","price":289.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/Griptec57mmMKAU2.jpg?v=1740696289"},{"product_id":"direct-injector-cleaning-service","title":"Direct Injector Cleaning Service","description":"\u003cp\u003eIf you're having injector issues including black smoke, poor fuel mileage or misfires, it's likely that your injectors need some love. We are proud to offer fuel injector cleaning services for both direct and port injectors in-house at our Ontario, Canada location!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProcess:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlace your order for a quantity that matches the number of injectors you will be sending (6 = 6 injectors, 4 = 4 injectors, etc). If you opted for new seals, please include your VIN in the order notes to prevent delays. Once your order is placed, box up your injectors and send them to us \u003ca href=\"https:\/\/garageautosports.com\/pages\/contact-us\" target=\"_blank\" rel=\"noopener\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAs soon as we receive your injectors we will run an initial test, measuring the effective flow rate and evaluating the spray pattern and removing the old seals.\u003c\/p\u003e\n\u003cp\u003eYour injectors will then receive our full spa treatment, with an internal and external ultrasonic cleaning under our specific variety of operating conditions, a full back purge, and finally a second flow test and spray pattern evaluation.\u003c\/p\u003e\n\u003cp\u003eOnce clean, the injectors will be packaged up and send back to you along with a copy of your test results \u0026amp; evaluations. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou are responsible for shipping your injectors to us. The shipping cost you pay at checkout will cover return shipping to you\u003c\/li\u003e\n\u003cli\u003eWe will treat your injectors as if they were our own, but we are not responsible for any damage that occurs during shipping. Package your injectors carefully!\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis service covers injector cleaning, not repair. If you have a dead injector that does not function, we will contact you before proceeding\u003c\/li\u003e\n\u003cli\u003eWe will also clean port\/MPI injectors for the same cost\u003c\/li\u003e\n\u003cli\u003eNew injector seal kits can be provided if desired. Include your VIN and we will update your order with the new seals\u003c\/li\u003e\n\u003cli\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003ePrice is per injector, order the number of injectors you have\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garage Auto Sports","offers":[{"title":"Yes; I would like a quote on new seals (VIN required)","offer_id":44930175795399,"sku":"INJ-CLEAN-SEAL","price":39.95,"currency_code":"USD","in_stock":true},{"title":"No; I will source my own seals","offer_id":44930175828167,"sku":"INJ-CLEAN","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0088\/3969\/2384\/files\/RS4fuelinjector.jpg?v=1740758810"}],"url":"https:\/\/garageautosports.com\/en-int\/collections\/c7-a6-a7-engine.oembed","provider":"Garage Auto Sports","version":"1.0","type":"link"}