The Alpha Performance Audi B8.5 Supercharger Cooler System is a great addition to your S4/S5 whether your car is stock or modified. The system features a large, high-efficiency heat exchanger located at the front of the car, an additional reservoir that holds over a gallon of coolant and a high flow pump which runs complementary to the factory pump. Whether you live in a warm region of the world, enjoy long spirited drives in the mountains or run long sessions at your local track day, the S4/S5 Supercharger Cooler will keep your intake temps low, maintaining your 3.0 TFSI supercharged engines maximum output.
As with all Alpha Products, everything needed to install the system is included - bolts, fittings, lines, etc. Best of all, no drilling or modifications to the car are required, it’s a 100% bolt-on affair.
The ‘Core’ of the System
The most important part of an efficient heat exchanger system is the core, skimping here could mean the overall performance of an ‘upgraded’ system might be worse than stock! The OEM unit is a single pass design with a core area of 156in^2. Our Alpha core is a high quality, triple-pass unit where the coolant makes three passes through the heat exchanger vs competing cooling kits that use a single pass design. The core is made in the UK with a fin area of 417in^2, almost three times the surface area of the stock core! For added durability the fins are hemmed for strength, able to withstand abuse from road debris.
Increased Coolant Capacity, Decreased Heat Soak
The hand-fabricated Alpha coolant reservoir acts as a large heat sink to keep coolant temperatures low and stable. With over a gallon more coolant on board, it increases the cycle time of the coolant in your S4/S5 allowing it to dissipate more heat before being recirculated, working as a large thermal reservoir, keeping the horsepower-killing heat soak at bay.
Pumping Up the Power!
To give you the best possible performance and keep the coolant flowing efficiently through the larger Alpha heat exchanger, we added an additional high flow brushless pump to run in conjunction with the OEM brushless pump. The combination of the two pumps allows a very high flow rate to keep the fluid moving and maintains that flow rate at higher pressures giving you the assurance your car will stay cool in hot climates, extended track sessions or everyday driving.
The Devil is in the Details:
To provide your S4/S5 with the best cooling system on the market we thoroughly tested multiple variations of the Alpha Supercharger Cooler System. We tested divorced and non-divorced systems finding that divorcing the system showed no real gains, only added complexity. We found the stock pump stops flowing at 8psi so we added an additional brushless pump to support running higher pressure and maintain flow. Datalog after datalog was recorded and the results analyzed until our engineers were completely satisfied.
- High-Quality Triple Pass Heat Exchanger
- Hand-Fabricated Reservoir
- Brushless Coolant Pump
- 4 Ply Heavy Duty Silicone
- Brushless Pump Plug-in Jumper Harness
- All Hardware Needed for Install
- Factory Coolant Tube
- Much Better Heat Rejection vs Stock
- No Loss of Horsepower from Heat Soak
- Car Runs Cooler all the Time
- Cooler Intake Temps
- Increased Efficiency of the OEM Intercooler
- No Drilling or Modification to the car Required – 100% bolt-on!
- Compatible with S4 or S5’s equipped with ACC (Adaptive Cruise Control)