Garage Auto Sports
GAS WMI Kit, Audi 3.0T Supercharged
- Regular Price
- €751,95
- Sale Price
- €751,95
- Regular Price
Sold Out
- Unit Price
- Translation missing: en.general.accessibility.unit_price_separator
We've assembled this easy-to-install kit for your supercharged Audi based on our years of WMI experience. Fits all EA837 3.0T Audi platforms! Our kit uses our recommended line diameter of 5/16" to meet 75LPH pump flow requirements. Please see our flow chart below for why this is.
Note: Professional installation is recommended. There will be wiring required.
Benefits of running water/methanol injection:
- Colder IATs mean denser air, which means less detonation. This raises your effective octane level up to 106+ octane. We regularly see sub-20 degree IATs on our supercharged cars when running meth, even on the hottest track days. Our shop 4.0T dropped from 98 degrees to 33 degrees, a 65 degree reduction!
- WMI provides an extra fueling source, meaning your fuel pumps and injectors don’t have to work as hard. You can easily gain an additional 20-50% fueling capacity by adding meth injection to your build
- Running WMI will keep your supercharger and intake ports clean and free of carbon buildup, which means saying goodbye to carbon cleaning
- Improved fuel mileage
Includes:
- 11.35 Litre (3 Gallon) trunk tank
- 1260cc (20 GPH) high flow pump (supports 700-900bhp at 50/50 blend)
- 5/16" Teflon-lined reinforced nylon hose (15ft)
- Snow Performance VC-30 WMI controller
- WMI Solenoid
- GAS billet EA837 WMI plate
- 9 GPH/570cc nozzle & nozzle holder
- All fittings & adapters
Pump Specifications:
- 1.1 gallons per minute (open flow)
- Use 12 gauge wire for power and ground
- 75 liters per hour @ 190 PSI
- 20 gallons per hour @ 190 PSI
- 1260 cubic centimeters @ 190 PSI
Tank Specifications:
- 3 gallon capacity
- Built-in rear-facing sump
- 100% methanol compatible
- Large 3/8 NPT thread outlet port
- Seamless roto-molded construction
- 8AN stainless steel braided hose
- 8AN tank outlet fitting
- 8AN pump inlet fitting
- 5/16" pump outlet fitting
- Flush-mounted fuel cell cap
- Tank air vent integrated into cap
- Stainless steel cap ring and hardware
- Pump mount cavity designed into underside of tank
- Pump mounting inserts molded into tank
- Black powder-coated aluminum mounting brackets
- Includes pump and bracket mounting hardware
- Dimensions: 15.5" length x 10.5" width x 8.0" height (18.5" length with straps)